Radar Barriers

The radar barrier system consists of two radars which have contact with each other during operation.  A  break caused by an obstacle between the two devices will activate an alarm output at both units. 

Object detections will be reported by open-collector-outputs. Each unit has one output which can be used for example as a stop feature. The output at each unit are allocated at a 3-pin RSF4 standard connector.

This system was designed by PPT anti-collison protection from STS to ship superstructure in mind.

Advantages:  

 
  • High operating distance
  • High parallel offset
  • Insensibility against environmental conditions
  • High class of protection
  • Heavy duty enclosure
  • Different modulations A/B and C/D versions in case of 2 systems working close together
To prevent a interaction between two radar barrier systems working close together there are two barrier couples avaliable (A/B and C/D)  with different modulation available.
Show All | 12 | 24 per page

Products

CRAS80-11/11 Version A/B
Radar Barrier
Technical info:
 
  • Beam angle: 11°/11° (±5.5°)
  • Range: Standard Range
  • Moving/ Stationary: Moving or stationary
  • Dimensions: 100x100x42mm
  • Weight: Approx 600g per unit
  • Voltage: 24 VDC

Saving please wait..


Info
CRAS80-11/11 Version C/D
Radar Barrier
Technical info:
 
  • Beam angle: 11°/11° (±5.5°)
  • Range: Standard Range
  • Moving/ Stationary: Moving or stationary
  • Dimensions: 100x100x42mm
  • Weight: Approx 600g per unit
  • Voltage: 24 VDC

Saving please wait..


Info
Show All | 12 | 24 per page

Contact Info

Find us
Devonshire Business Centre
Works Road, Letchworth
Herts, SG6 1GJ (UK)
Opening Hours:  Mon- Fri 9am-5pm
Get in touch
Phone: 01223 923 930
Fax: 01223 923 940
Email: info@sentekeurope.com
Connect with us
Facebook: @SentekEurope
Twitter: @senteksolutions
LinkedIn:  sentek-solutions-ltd